IACET Accredited Provider
AGMA offers CEUs for its programs that qualify under the ANSI/IACET standard.
FTM 2024: Full Session Bundle
-
You must log in to register
- Non-member - $1,599
- Member - $1,395
Already registered?
Log in now.
| This purchase includes a recording of the presentations and a copy of the papers of all sessions from the 2024 Fall Technical Meeting. |
Key:
Complete
Next
Failed
Available
Locked
Session 1 Paper: The Role of In-Situ Techniques in Microstructure Optimization of Interstitially Alloyed Steels
Open to download resource.
Open to download resource.
Thomas Christiansen, Worcester Polytechnic Institute
Session 1 Recording: The Role of In-Situ Techniques in Microstructure Optimization of Interstitially Alloyed Steels
Open to view video.
Open to view video.
Session 1 Paper: Durability and Performance Rating Procedures for Plastic Spur Gears
Open to download resource.
Open to download resource.
Author Damijan Zorko, RD Motion, d.o.o.
Session 1 Recording: Durability and Performance Rating Procedures for Plastic Spur Gears
Open to view video.
Open to view video.
Session 1 Paper: A Preliminary Study on a Novel Procedure for the Assessment of Fatigue Performance of PA6 Polymer Gears
Open to download resource.
Open to download resource.
Author: Riccardo Longato, Longato Riccardo Srls
Session 1 Recording: A Preliminary Study on a Novel Procedure for the Assessment of Fatigue Performance of PA6 Polymer Gears
Open to view video.
Open to view video.
Session 1 Paper: Bending Fatigue Strength of Gear Steels for Automotive Electric Drive Units
Open to download resource.
Open to download resource.
Author: Christopher Aylott, Newcastle University
Session 1 Recording: Bending Fatigue Strength of Gear Steels for Automotive Electric Drive Units
Open to view video.
Open to view video.
Session 1 Paper: Analysis of Tooth Bending Fatigue of AISI 9310 Gears Through Strain-Based Criteria
Open to download resource.
Open to download resource.
Author: Lorenzo Pagliari, Free University of Bozen-Bolzano
Session 1 Recording: Analysis of Tooth Bending Fatigue of AISI 9310 Gears Through Strain-Based Criteria
Open to view video.
Open to view video.
Session 1 Paper: Experimental Study on the Performance of Plastic Worm Gears
Open to download resource.
Open to download resource.
Author: Borut Cerne, RD Motion, d.o.o.
Session 1 Recording: Experimental Study on the Performance of Plastic Worm Gears
Open to view video.
Open to view video.
Session 2 Paper: Design Alternative for a Helicopter Final Stage Planetary Gearbox, Introducing the Innovative Orbicular Gear Mechanism (OGM)
Open to download resource.
Open to download resource.
Mert Vardar, Tr Transmisyon Engineering
Session 2 Recording: Design Alternative for a Helicopter Final Stage Planetary Gearbox, Introducing the Innovative Orbicular Gear Mechanism (OGM)
Open to view video.
Open to view video.
Session 2 Paper: Analytical Calculation of the Gear Body Stiffness of Face Gears
Open to download resource.
Open to download resource.
Jonas-Frederick Berger, Gear Research Center (FZG), Technical University of Munich
Session 2 Recording: Analytical Calculation of the Gear Body Stiffness of Face Gears
Open to view video.
Open to view video.
Session 2 Paper: Electric vs. Combustion: A Comparative Analysis of Gear Design for Commercial Vehicle Applications
Open to download resource.
Open to download resource.
Soniya Lahoti, Eaton India Innovation Center
Session 2 Recording: Electric vs. Combustion: A Comparative Analysis of Gear Design for Commercial Vehicle Applications
Open to view video.
Open to view video.
Session 2 Paper: Gearbox NVH Analysis – An Engineering Approach for Practical Gearbox NVH Investigations
Open to download resource.
Open to download resource.
Timo Giese, FunctionBay GmbH
Simon Schneider, Ulm University of Applied Sciences
Session 2 Recording: Gearbox NVH Analysis – An Engineering Approach for Practical Gearbox NVH Investigations
Open to view video.
Open to view video.
Session 2 Paper: Design Method of System Tolerances in Cylindrical Gearboxes for Cost-Efficient Optimization of the Excitation Behavior
Open to download resource.
Open to download resource.
Laurenz Roth, Laboratory for Machine Tools (WZL) of RWTH Aachen University
Session 2 Recording: Design Method of System Tolerances in Cylindrical Gearboxes for Cost-Efficient Optimization of the Excitation Behavior
Open to view video.
Open to view video.
Session 2 Paper: Calculation of the Scuffing Load Capacity of Spur Gears Using a Local Thermophysical Approach
Open to download resource.
Open to download resource.
Mathis Steinrötter, Ruhr University Bochum
Session 2 Recording: Calculation of the Scuffing Load Capacity of Spur Gears Using a Local Thermophysical Approach
Open to view video.
Open to view video.
Session 3 Paper: Influence of Reverse Loading on the Tooth Flank Fracture Load Capacity
Open to download resource.
Open to download resource.
Johannes Rolzhäuser, Laboratory for Machine Tools (WZL) of RWTH Aachen University
Session 3 Recording: Influence of Reverse Loading on the Tooth Flank Fracture Load Capacity
Open to view video.
Open to view video.
Session 3 Paper: Categorization of Gear Stiffness Calculation Methodologies, Workflows and Software
Open to download resource.
Open to download resource.
Adam Foltz, Purdue University in Indianapolis
Session 3 Recording: Categorization of Gear Stiffness Calculation Methodologies, Workflows and Software
Open to view video.
Open to view video.
Session 3 Paper: Evaluation of Gear Contact Fatigue Surface Integrity Aspects in Fatigue Lifetime Using the Barkhausen Noise Technique
Open to download resource.
Open to download resource.
Bruno Lima, Aeronautics Institute of Technology (ITA)
Session 3 Recording: Evaluation of Gear Contact Fatigue Surface Integrity Aspects in Fatigue Lifetime Using the Barkhausen Noise Technique
Open to view video.
Open to view video.
Session 3 Paper: Investigation of Gear Involute Deviations Under Press-Fit Conditions
Open to download resource.
Open to download resource.
Anusha Anisetti, Eaton Corporation
Session 3 Recording: Investigation of Gear Involute Deviations Under Press-Fit Conditions
Open to view video.
Open to view video.
Session 3 Paper: Influence of Unbalanced Sliding Conditions on the Pitting Load Carrying Capacity of Internal Gears
Open to download resource.
Open to download resource.
Michael Geitner, Gear Research Center (FZG), Technical University of Munich
Session 3 Recording: Influence of Unbalanced Sliding Conditions on the Pitting Load Carrying Capacity of Internal Gears
Open to view video.
Open to view video.
Session 3 Paper: Influence of Nonlinear Cumulative Damage in Gear Lifetime Analysis
Open to download resource.
Open to download resource.
Riley Damm, The Ohio State University
Session 3 Recording: Influence of Nonlinear Cumulative Damage in Gear Lifetime Analysis
Open to view video.
Open to view video.
Session 4 Paper: Advanced Gearbox Lubrication Analysis: A Virtual Lab for Design Optimization
Open to download resource.
Open to download resource.
Benjamin Beckelynck, Optimec Consultants Inc.
Session 4 Recording: Advanced Gearbox Lubrication Analysis: A Virtual Lab for Design Optimization
Open to view video.
Open to view video.
Session 4 Paper: Nanocomposite Coatings for Gears
Open to download resource.
Open to download resource.
Peter Schmidt, United Protective Technologies, UNCC PORTAL
Session 4 Paper: CFD Simulation of Power Losses and Lubricant Flow in Gearboxes
Open to download resource.
Open to download resource.
Franco Concli, Free University of Bozen-Bolzano
Session 4 Recording: CFD Simulation of Power Losses and Lubricant Flow in Gearboxes
Open to view video.
Open to view video.
Session 4 Paper: How to Replace Oil as a Lubricant in Worm Gearboxes with Grease
Open to download resource.
Open to download resource.
Felix Müller, University of Kaiserslautern-Landau
Session 4 Recording: How to Replace Oil as a Lubricant in Worm Gearboxes with Grease
Open to view video.
Open to view video.
Session 4 Paper: Mitigation of Gear Whine Noise in Agricultural Tractor Applications
Open to download resource.
Open to download resource.
Prashant Bardia, John Deere India
Session 4 Recording: Mitigation of Gear Whine Noise in Agricultural Tractor Applications
Open to view video.
Open to view video.
Session 4 Paper: Advanced Lubricant Technology for Open Gear Applications
Open to download resource.
Open to download resource.
Jennifer Clark, The Lubrizol Corporation
Session 4 Recording: Advanced Lubricant Technology for Open Gear Applications
Open to view video.
Open to view video.
Session 4 Paper: Efficient Numerical Assessment of Thermal Effects in a Gearbox Using Smoothed Particle Hydrodynamics
Open to download resource.
Open to download resource.
Benjamin Legrady, Dive Solutions GmbH
Session 4 Recording: Efficient Numerical Assessment of Thermal Effects in a Gearbox Using Smoothed Particle Hydrodynamics
Open to view video.
Open to view video.
Session 5 Paper: Statistical Analysis of the Position Tolerances of Planet Pins in Planetary Gearboxes
Open to download resource.
Open to download resource.
Benjamin Abert, FVA GmbH
Session 5 Recording: Statistical Analysis of the Position Tolerances of Planet Pins in Planetary Gearboxes
Open to view video.
Open to view video.
Session 5 Paper: A Review on Gear Transmission Error
Open to download resource.
Open to download resource.
Zhaoyao Shi, Beijing University of Technology
Session 5 Paper: Generating Gear Grinding in E-Mobility: Challenges and Solutions
Open to download resource.
Open to download resource.
Maximilian Zimmer and Christoph Leonhardt , Reishauer AG
Session 5 Recording: Generating Gear Grinding in E-Mobility: Challenges and Solutions
Open to view video.
Open to view video.
Session 5 Paper: Innovative Processes and Strategies for Increasing Machining Efficiency for Worms and Worm Gears
Open to download resource.
Open to download resource.
Jörg Lohmann, EMAG Koepfer GmbH
Session 5 Recording: Innovative Processes and Strategies for Increasing Machining Efficiency for Worms and Worm Gears
Open to view video.
Open to view video.
Session 5 Paper: Cutting Tool Selection Criteria for Cylindrical Gear Manufacturing
Open to download resource.
Open to download resource.
Massimiliano Turci, Studio Tecnico Turci
Session 5 Recording: Cutting Tool Selection Criteria for Cylindrical Gear Manufacturing
Open to view video.
Open to view video.
Session 5 Paper: Influence of Material Removal Rate on Residual Stress State in Gear Grinding
Open to download resource.
Open to download resource.
Angelo Carvalho, Aeronautics Institute of Technology (ITA)
Session 5 Recording: Influence of Material Removal Rate on Residual Stress State in Gear Grinding
Open to view video.
Open to view video.
Session 5 Paper: Micropitting Load Carrying Capacity of 5-Axis Milled Gears
Open to download resource.
Open to download resource.
Jaacob Vorgerd, Ruhr University Bochum